EN 60335-2-23, “Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care”, sets the safety requirements for hair dryers, hair straighteners and similar appliances. It is read together with EN IEC 60335-1; Part 2-23 holds the rules that are added or changed for these appliances. They are held in the hand, work close to the body and are mostly used in bathrooms, and that is where the standard puts its weight.

Let us take care of EN 60335-2-23 testing and the CE marking of your product together; CE Danışmanı (CE Consultant) manages the whole process.

EN 60335-2-23 harmonised standard

EN 60335-2-23 at a glance

Edition cited in the EU Official JournalEN 60335-2-23:2003
Official titleHousehold and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care
Legislation supportedLow Voltage Directive 2014/35/EU
Type of standardProduct standard

Products covered

The standard applies to electrical appliances for the care of the skin or hair of persons or animals, including those used in hairdressing salons. Typical examples:

  • Hair dryers and hot-air stylers
  • Hair straighteners
  • Curling irons and heated rollers
  • Hand dryers
  • Facial saunas

Shavers and hair clippers belong to EN 60335-2-8, appliances for skin exposure to ultraviolet and infrared radiation to EN 60335-2-27, and massage appliances to EN 60335-2-32.

Particular requirements for skin and hair care appliances

  • Use near water: The appliance carries the symbol or warning that it must not be used near bathtubs, showers or basins; the instructions state that nearness to water is a hazard even when the appliance is switched off and that it must be unplugged after use.
  • Additional protection: The instructions recommend a residual current device in the circuit supplying the bathroom.
  • Blocked air inlet and outlet: When the air flow of a hair dryer is restricted, the thermal cut-out must operate and the body must not ignite or deform dangerously.
  • Hair drawn in: The air inlet grille is designed to make it difficult for hair to be drawn into the fan.
  • Surface temperatures: The temperature of parts that touch hair and skin and of the grip is limited; curling irons and straighteners have a stand that keeps the hot part off the surface they are put down on.
  • Mechanical strength and supply cord: Live parts must not become accessible after a hand-held appliance has been dropped, and the cord must withstand constant bending and twisting in use.
  • Hand dryers and instructions: Wall-mounted hand dryers are built for splashing water and wet hands; the instructions cover use by children, cleaning and not winding the cord around the appliance.

Typical test programme

EN 60335-1 and EN 60335-2-23 are applied together. The programme depends on the kind of appliance.

Test or checkWhat is verified?
Power inputThe rated input is within the permitted deviation
Heating testTemperatures of windings, cords, grips and contact surfaces stay within limits
Abnormal operationThe thermal cut-out opens when the air inlet or outlet is blocked or the fan stops
Leakage current and electric strengthInsulation is adequate at operating temperature and after the humidity test
Drop and impact testLive parts stay inaccessible even if the body breaks
Cord flexing testConductors do not break and insulation is not damaged at the cord entry
Resistance to heat and firePlastic parts pass the glow-wire and ball pressure tests

Place in the CE marking process

  1. Risk assessment: Hazards of electric shock, burns and fire are identified with hand-held use near water in mind.
  2. Design: The insulation class, thermal cut-outs and cord entry are chosen to meet the standard.
  3. Verification and testing: The sample is tested to EN 60335-1 and EN 60335-2-23; EMC tests are done separately.
  4. Technical file: Test reports, diagrams, the list of critical components and the instructions go into the technical file.
  5. Declaration of conformity: EN 60335-2-23 is listed among the standards applied and the CE marking is affixed.

Compliance with the harmonised standard gives presumption of conformity with the relevant essential requirements of the Low Voltage Directive. Turkey applies the same rules through its own aligned regulation.

Standards applied together

  • EN 55014-1 and EN 55014-2: EMC emission and immunity of household appliances
  • EN 62233: measurement of electromagnetic fields of household appliances
  • EN 60335-2-30: room heaters, another Part 2 of the same family
  • RoHS: restriction of hazardous substances

Frequently asked questions

Is EN 60335-2-23 enough on its own?

No. Part 2-23 is applied together with EN 60335-1 and the test report covers both. EMC, RoHS and other legislation are assessed separately.

Are professional salon appliances covered?

Yes. Hair dryers and similar appliances used in hairdressing salons are assessed with this standard as well.

Which edition applies?

The edition cited in the EU Official Journal is EN 60335-2-23:2003. Check the current citation before testing starts.

Other standards in this group

All standard guides

Get an offer for your product

Scope, timeline and price in three steps.

  1. 1Tell us about your productAttach a datasheet or photos if you have them
  2. 2Scope and tests become clearDirectives, tests, notified body
  3. 3Price and timeline in your handsOffer within one business day

Prefer to talk now?

Leave your details

Reply within one business day

By sending this form you agree that your data is processed as described in our Privacy & Cookie Policy.